La-crosse-technology WS-9031U Bedienungsanleitung Seite 1

WS-9031U Quick Set-up instructions 1) Insert two AA batteries into the remote transmitter. 2) Insert three AA batteries into the Weather Projection

following sensor. The Weather Projection Station will number the sensors in the order of set-up, i.e. the first sensor will have the temperature/hum

If the batteries are used as the main power source: 1. Projected image brightness, alarm volume and back-light strength will be weaker when batteri

1. Connect the AC-DC adapter to a wall socket. Plug the adapter into the jack at the side of the Weather Projection Station. All segments of the LC

sensors in the order of set-up, i.e. the first sensor will have the temperature/humidity displayed with the number 1 against it and so on. 5. With

Note: If the Weather Projection Station is powered through the AC-DC adapter, the projection will be constantly ON. If the Weather Projection Sta

up the Weather Projection Station again. Proceed from step 1 in “Setting Up”,“Battery Installation” or “How to use the Projector Adaptor”. HOW TO U

3. Adjust the projection image in an upright position with the key. Note: If more than one Thermo-hygro Sensor is used, only the temperature fro

announced at the top of the minute in “Coordinated Universal Time”, which is also known as Greenwich Mean Time (GMT). This time does not follow Dayl

ALARM 1 key HOUR/IN key MIN/OUT keyALARM 2 key DIRECTION key SET keyCH/+ keyDISPLAY keySNOOZE key SET key • Enter manual setting m

• Stop the alarm during alarm ringing • Stop snooze mode • Back-light on CH/+ key • Increase value in all setting modes • Stop the alarm during

WS-9031U WEATHER PROJECTION STATION POSTE METEO A PROJECTION ESTACION CON PROYECCIÓN DEL ESATDO DEL TIEMPO Instruction Manual Mode d’emploi Manua

ALARM 1 key • Enter/exit the alarm 1 setting mode • Active/de-active the alarm time 1 (even inside snooze mode) • Stop the alarm during alarm rin

• Stop the alarm during alarm ringing • Stop snooze mode • Back-light on ALARM 2 key • Enter/exit the alarm 2 setting mode • Active/de-active t

Moon phase icon Alarm time Weather tendency indicator TimeCalendar display Indoor relative humidity in RH% Time reception icon (for WWVB time) Alarm

MANUAL SETTINGS: The following manual settings can be changed when pressing the SET key for: • LCD contrast setting • Time zone setting • DST (Da

2. Use the CH/+ key to view all levels of contrast. 3. Select the desired LCD contrast. Confirm with the SET key and enter in the Time Zone setti

DST (DAYLIGHT SAVING TIME) SETTING: Note: The DST default is “ON”, meaning that the received time will automatically be adjusted according to Da

In area where reception of the WWVB time is not possible, the WWVB time reception function can be turn OFF. The clock will then work as a normal Qua

MANUAL TIME SETTING: In case the Weather Projection Station cannot detect the WWVB-signal (for example due to disturbances, transmitting distance, e

CALENDAR SETTING: The date default of the Weather Projection Station is 1. 1. in the year 2003. Once the radio-controlled time signals are rec

SNOOZE SETTING: The snooze time can be set OFF to a maximum time of 30 minutes (default is 10 minutes): 1. Use the CH/+ key to set the snooze ti

WEATHER PROJECTION STATION Instruction Manual INTRODUCTION: Congratulations on purchasing this state-of-the-art weather projection station as an e

Icons flashing 1. Use the CH/+ key to toggle between “°F” or “°C”. 2. Confirm with the SET key and enter the Weather forecasting icon sensitivity

ALARM SETTING: The alarm time can be set when pressing the ALARM 1 or ALARM 2 key. 1. Press the ALARM 1 or ALARM 2 key until the alarm digits

SNOOZE ACTIVATION AND STOPPING THE ALARM: The snooze function can be activated when the alarm is ringing by pressing the SNOOZE key. However the sno

New Moon Full Moon Small Waxing Crescent Large Waning Gibbous Large Waxing Crescent Small Waning Gibbous First Quarter Las

• High Tide occurs during New Moon and Full Moon phase • Medium Tide (Med) occurs during any of the other moon phases • Low Tide occurs during Fi

The icons displayed forecasts the weather in terms of getting better or worse and not necessarily sunny or rainy as each icon indicates. For example

hours. By doing this, the Weather Projection Station will not mistake the new location as being a possible change in air-pressure when really it is

INDOOR RELATIVE HUMIDITY AND INDOOR TEMPERATURE: The indoor temperature and humidity data, the indoor comfort indicator are automatically updated an

data will also be displayed in the time and calendar sections (for temperature data only). 2. To reset the MIN/MAX data, press and hold the HOUR/IN

TOGGLING AND RESETTING THE OUTDOOR RECORDINGS: 1. To toggle between the outdoor current, MIN/MAX temperature and humidity data and the times (for

Battery compartment LCD Display Function keys FEATURES: The Weather Projection Station Projector Function keysSNOOZE key

TO EXIT THE MANUAL SETTING MODE To exit the manual setting mode anytime during the manual setting modes, press the SNOOZE key anytime or wait for au

1. The distance of the Weather Projection Station or sensor should be at least 6 feet (2 meters) away from any interfering sources such as computer

POSITIONING THE THERMO-HYGRO SENSOR: Each sensor is supplied with 2 wall mounting screws and plastic anchors. To wall mount simply: 1. Secure the w

• Do not submerge the units in water. • Immediately remove all low powered batteries to avoid leakage and damage. Replace only with new batteries

Indoor temperature checking interval : every 15 seconds Indoor humidity checking interval : every 20 seconds Outdoor temperature reception :

by this product should be taken only as an indication and not as being totally accurate. • The specifications of this product may change without pr

if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Techn

use (7) applications and uses that this product was not intended or (8) the products inability to receive a signal due to any source of interference

2809 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610 Fax: 608.796.1020 e-mail: [email protected] (warranty work) sales@lacross

FCC ID: OMO-01RX (receiver), OMO-01TX (sensor) THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TW

• WWVB Radio controlled time with manual setting option • Time reception ON/OFF (user selectable) • 12/24 hour time display • DST ON/OFF (dayli

• Projection with adjustable brightness and projection orientation possible • LCD contrast selectable • LED back light • Low battery indicator •

TO INSTALL AND REPLACE BATTERIES IN THE WEATHER PROJECTION STATION The Weather Projection Station uses 3 x AA, IEC LR6, 1.5V batteries. To install a

2. Insert the batteries, observing the correct polarity (see marking). 3. Replace the battery cover on the unit. Note: In the event of changing b

BATTERY INSTALLATION: 1. First, insert the batteries into the Weather Projection Station (see “To install and replace batteries in the Weather Proj