La-crosse-technology WIRELESS 433 MHZ WS-9035TWC Bedienungsanleitung

WS-9035TWC Wireless 433 MHz Radio-controlled Weather Station Instruction Manual

10Sunny—indicates that the weather is expected to improve (not that the weather will be sunny). Sun with Clouds—indicates that the weather is expecte

11 2. Press and release the OUT/MIN button again (once while “MAX” is still displayed, twice otherwise). “MIN” appears to the right of the outdoor

121. Press and hold the SET button for 5 seconds. 2. The record will now be reset and show the current time in the TIME LCD and dew point reading i

13Wind Speed Beaufort Number or Force mph km/hr knots Description Effects Land / Sea 0 <1 <1 <1 Calm Still, calm air, smoke will rise

149 47-54 mph 75-88 kph 41-47 knots Strong Gale Slight damage occurs to buildings, shingles are blown off of roofs. High waves (6 meters), rolling s

15 MOUNTING Note: Before permanently mounting ensure that the indoor weather station is able to receive WWVB signals from the desired location. Al

16II. THE REMOTE WIND SPEED SENSOR The remote wind speed sensor can be mounted two ways: • With the use of screws • Using nylon straps A. MOUNT

17 5) Place the remote temperature/humidity sensor and indoor weather station in position so the straight-line signal is not passing through more th

18SPECIFICATIONS Weather data measuring range: Indoor: 14.2°F to 139.8°F with 0.1°F resolution (0°C to 59.9°C with 0.1°C resolution) “OFL” displayed

19WARRANTY INFORMATION La Crosse Technology provides a 1-year warranty on this weather station. Contact La Crosse Technology immediately upon disco

2 TABLE OF CONTENTS Topic Page Inventory of Contents/Additional Equipment 3 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery instal

3 INVENTORY OF CONTENTS 1. The WS-9035U weather station (Figure 1). 2. One TX8U remote temperature/humidity sensor (Figure 2). 3. One TX15U win

4QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor weather station, remote tempera

5 1. Remove the battery cover. To do this, insert a solid object in the space provided at the lower-central position of the battery cover, then pus

6 III. SETTING THE LCD CONTRAST 1. Press and hold the SET button for 5 seconds. 2. “LCD” will show in the TIME LCD and the number setting will fl

72. “LCD” will show in the TIME LCD and the number setting will flash. 3. Press and release the SET button three times. 4. “RCC” will appear in th

8 IX. SETTING THE YEAR, DAY AND MONTH Note: Reception of the WWVB signal will also set the date and day. The reception of the signal will override

94. Either “1”, “2” or “3” will flash in the TIME LCD and the forecast icon and tendency arrows will flash in the FORECAST LCD. 5. Press and releas